AAA Supports P. Ltd.

Variable Load Effort Spring Support

The company was established in the year 2006 & since then to now, the company has been acquainted as one of the leading manufacturer of the following items. The design & detail of large / small order from customer can be h&led in our engineering department by experienced designers who are capable of giving practical advised with active assistance in the design of pipe support system. We also offer complete pipe support overall site survey including analysis of new or existing pipe system.

Type A

This type of support is suitable where there is sufficient installing space. It is mainly provided with a threaded bushing in the top plate, in order for a simple rod attachment for the upper connection.

Type B & C

This type of support is mainly used where installing space is limited. It is generally furnished with one or two lugs welded to the top plate of the casing.

Type D & E

This type of support is suitable where spring box/casing. For type ‘D’ a rod adjustment is permitted from the top. For type ‘E’ a rod adjustment is permitted from either above or below the spring.

Type F

This type of support is designed to support the piping upward, i.e. from below, directly from the base/ floor or supporting steel. An adjustment in height is available by turning the load column & for fastening four holes is drilled at the base plate .

Type G

This type of support is generally formed by welding two st&ard variable spring supports back to back at the ends of a pair of channels.